induction quenching
英 [ɪnˈdʌkʃn ˈkwentʃɪŋ]
美 [ɪnˈdʌkʃn ˈkwentʃɪŋ]
网络 感应淬火
双语例句
- Complete equipment for high frequency induction quenching
高频感应淬火成套设备 - Complete equipment for high frequency induction quenching Quenching for Reaction-diffusion Systems with Logarithmic Singularity
高频感应淬火成套设备具有对数奇异项的反应扩散方程组解的淬灭 - Heat treatment technics such as tempering, vibration aging, induction quenching and so on adopted on key parts like bed enable more stable accuracy and longer working life.
床身等关键件的回火、震动时效、超音频淬火等热处理工艺，使机床精度更稳定，使用寿命更长（建议在顶部搜索“刨床、插床”，以便查询更多刨床、插床厂家。） - Development of Induction Quenching
感应加热淬火技术的发展 - Induction Quenching For Camshaft With Eccentric Wheel
带偏心轮凸轮轴的感应加热淬火 - The Research of the Work-Frequency Induction Quenching Process for Concave Work Rolls
凹面工作辊工频淬火工艺的研究 - The Application of Induction Quenching Technology to Automobile Parts Production
感应淬火技术在汽车零件制造中的应用 - The Automatic Control of Heating Temperature of Case Induction Quenching
体积&表面淬火中加热温度的自动控制 - Technical Knack for Double-Frequency Induction Quenching of Cold Roll
冷轧辊双频感应淬火工艺诀窍 - The aim of induction quenching has been enlarged from only improving local wear resistance to improving whole static strength and fatigue strength of parts.
感应淬火的目的已从仅仅提高零件的局部耐磨性扩大到提高零件的整体静强度和疲劳强度。 - Dynamic Simulation of The Cracking of Corrugating Rollers in Mid-frequency Induction Quenching
瓦楞辊中频感应淬火热裂的计算机动态仿真 - Application of induction quenching in pre-formed fragment steel
感应淬火在预制破片弹中的应用 - The induction quenching process of cylinder workpiece is analyzed, and the temperature distribution and its variation with time are obtained.
利用有限元模拟方法，分析了圆柱工件的感应淬火过程，得到了工件的温度分布状况以及温度随时间的变化规律。 - The Application of Tune of Parallel Oscillation Circuit to Induction Quenching
在感应淬火应用上并联振荡电路调谐探讨 - In order to improve surface properties of the materials, high-frequency induction quenching and wide-bond laser quenching techniques were used in this test.
为了进一步提高材料的使用性能，本实验对制备出的铁基粉末冶金材料进行了两种表面淬火处理工艺：高频感应淬火和宽带激光淬火。 - The paper presents technological procedure of torque rod and relevant technical problems of several kind strengthening techniques for it-medium frequency induction quenching treatment, shot blasting, rolling and pre-twisting treatment.
介绍了扭杆的生产工艺流程及扭杆的几种强化技术&中频感应淬火处理、喷丸、滚压和预扭处理的有关技术问题。 - We studied the effect of processing parameter of the two surface treatment techniques on microhardness. Finally, we obtained optimal surface treatment processing parameter: high-frequency induction quenching output power 26.1kW;
对两种工艺下工艺参数对显微硬度的影响进行了研究，最终确定出优化后的表面处理工艺参数为：高频淬火装置输出功率为26.1kW； - This thesis sketchs out characteristics of parallel oscillatory circuit and tune means of KGPS applied in Induction quenching.
简述并联振荡电路特点以及感应加热淬火用SCR晶闸管中频电源调谐方法等。 - Application of Multifunctional Quenching Machine in Induction Quenching of Typical Parts
多功能淬火机床在典型零件感应淬火中的应用 - On condition that the sprocket ′ s hardness and effective hardening case depth meets the technical requirements, UCON A quenchant can minimize the PM sprocket ′ s induction quenching stress, and hence control the quenching crack rate within 1%.
在链轮硬度与有效硬化层深度达到技术要求的情况下，UCONA型水溶性淬火介质使铁基粉末冶金链轮感应淬火冷却时的应力降到最小，从而把淬火开裂比例控制在1%以内。 - Surface induction quenching can remarkably reduce the torsion fatigue strength of crankshaft, while ion nitriding has no obvious effect on it.
表面感应淬火显著降低曲轴的扭转疲劳强度，而离子氮化的作用不明显。 - Control Induction Quenching Quality of Gear with PQA Quenchant
采用新型PQA淬火剂控制齿轮感应淬火的质量 - Application of UCON A Water-Soluble Quenchant in Induction Quenching of Powder Metallurgy Steel Parts
UCONA型水溶性淬火介质在粉末冶金件感应淬火中的应用 - The surface induction quenching test on gray iron and spheroidal graphite cast iron indicated that the equipment was easy to operate, and had strong stability, it was provided with practicality value.
通过对灰口铸铁和球墨铸铁材料的表面感应淬火工艺的试验，证实该设备操作简便、稳定性强，具有很高的实用价值； - To make good synthetical benefit, the induction quenching process has been done after partial finish machining.
将感应淬火工序放在部分精加工后进行，可获得良好的综合效果。 - Research on File's High-Frequency Induction Quenching
钢锉高频感应加热淬火研究 - Induction Quenching of Ball Head Pin in Protective Atmosphere
球头销在保护气氛中感应淬火 - The application, influence factors and process control of four kinds of heat treatment methods including tempering, carburizing, nitriding and induction quenching are analyzed.
对齿轮的调质、渗碳淬火、渗氮及感应淬火四大热处理工艺的应用范围、影响因素及工艺控制要点进行了分析。 - The induction quenching realizes imitated stress strengthening, raises fatigue limit and service performance of the torque rod.
感应淬火实现了仿应力强化，提高了扭杆的疲劳极限和使用性能。